Content :

Hydrophobic 5mm 10mm Aerogels Felts For Space Saving





Hydrophobic 5mm 10mm Aerogels Felts For Space Saving


Aerogel composite insulation materials are very thin, with 240 mm solid clay brick wall 75% of building energy efficiency standards as an example, the use of ordinary insulation materials need 90 mm thickness, and the use of Aerogel composite products only 15 mm thickness, More than 80% thinner than the original. It is estimated that if the exterior of the house is affixed with an Aerogel compound product, the room occupancy rate will increase by about 5% due to its light and space saving under the same floor area.









Pyrogel Aerogels Insulation Felt Feature


The Aerogel fabric have thermal insulation performance and surface hydrophobicity and excellent flame retardant properties.








Pyrogel Aerogels Insulation Fabric Specification








Aerogel Thermal Isolation Material: nanometer Silica Aerogel


Thickness: 3mm,5mm, 6mm, 10mm,


Color: White 


Width: 1500mm; Length: standard length is according to thickness. 


Aerogel Thermal Isolation Blanket Density: 180 ~ 220kg / m;


Aerogel Thermal Isolation Blanket Applicable temperature: -200 to  +600  


hydrophobic: absolutely hydrophobic (350 below);


Aerogel Thermal Isolation Blanket Thermal Conductivity: 0.012 - 0.018w / m k (at 25 )


Low Temperature Bending: 99%


Breaking Elongation: 65%


Bending Strength: 45KP


Compressive Strength: 32N


Thermal Conductivity: 0.012 - 0.018w/mk (At 25)








Model




HT650






Thickness




5mm,10mm as your request





.industrial-felts.com