Content :

1. Automatic ultrasonic mask spot welding machine
Using the principle of ultrasonic welding, automatic assembly line production, a piece of equipment only needs one person to put the mask under the ultrasonic system, and the mask can be automatically trimmed, spot welded, and finished. The advantages are high production efficiency, low labor cost, but high cost. , The one-time investment cost is very high, and the debugging is very difficult, the welding is easy to be unstable, and it is prone to failure, so a professional mechanic is required.
2. Semi-automatic ultrasonic mask spot welding machine
Semi-automatic, as the name implies, requires one person to operate each device. Put the mask pieces into the machine one by one. The double belts can realize automatic welding. The left and right welding cycle structure and double-point ultrasonic welding technology are used to complete the welding of mask earbands. Advantages The production efficiency is twice as high as the manual one, and one-third lower than the fully automatic output, but the performance is relatively stable. As the technology becomes more and more mature, the one-time input cost is much lower than the fully automatic one. It has become more and more popular with mask manufacturers, and debugging is not difficult.
3. Single point manual ultrasonic mask spot welding machine
The mask is mainly worn on both sides of the ear straps. If there are four points, if a single point is used, the principle of ultrasonic welding is used, through the principle of pneumatics, and the manual pedal is used to complete a spot welding. The single-point mask spot welding machine has a low cost of one-time input. It is suitable for use in underdeveloped areas, and the failure rate is almost zero. The debugging is simple and the operation is simple.
Dongguan Tengdi Electromechanical Technology Semi-automatic ultrasonic spot welding machine, manual single-point ultrasonic spot welding machine are available from stock.