Description :
These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software for DAQ purpose.
Specification :
| Digital Inputs | 16 |
|---|
| No.of Counters | 16 |
| Isolation (Field&Logic) | 1500 V RMS |
| Status Indication | LED for each channel |
| Power supply | "+12 V to +24 V" |
| Common specifications |
|---|
| Counter Resolution | 32 Bit |
| Counter frequency | 1 KHz |
| Pulse width | Min 500 Micro sec |
| Counter Mode | UP/Down |
| Digital input 0 level | 0-6.5 V |
| Digital input 1 level | +12 to +24 V DC |
| Input Impedance | 2200 ohms |
| Input filter | Max 6553 msec. |
| |
|---|
| Digital Outputs | 0 |
| Type of Digital output | N.A |
| Maximum load current | N.A |
| Maximum load Voltage | N.A |
| Isolation (Field&Logic) | N.A |
| Status Indication | N.A |
| |
|---|
| Watch dog timer | Available |
| Watch dog time | 1-255 sec, adjustable |
