Content :

Salt Fog Spray Walk in Test Chamber
Applicable range
Salt Fog Spray Walk in Test Chamber
This product series are in piece assembling structure, which enables on-site installation and commissioning. They are equipped with separate controlling chamber or operation bench.With large volume, the work chamber can be used to simulate the single or complicated environmental factors in the atmosphere such as temperature, humidity, salt fog, illumination, wind, rain and vibration.The products can be used to analyze and evaluate the property and performance of the batch elements and parts or machine sets under simulated conditions, and can also be used in experiment and production.Salt spray chamber's structure and performance index
(Salt Fog Spray Walk in Test Chamber)

Spray process: Salt spray system is composed of saltwater trough, pneumatic system,
brine storage tank, spray tower, nozzle and so on.
The salt water flows from the outside to the test chamber by natural drop,
and the salt solution is atomized by compressed air when through the
spray nozzle.
The temperature in chamber rise to the specified requirement through
the bottom heater,after temperature stable, open switch and do testing.
Comparing to ordinary salt spray test, the temperature of inner test chamber
is acheived by the heating rod by heating the air, to ensure the temperature
uniformity and minimize the effect of common salt spray test machine the steam
on test result.
The controller use touch screen, the program group 120 groups, a total of 1200
times cycles.
Temperature sensor Corrosion resistant platinum resistor PT100 Omega/MV
Heating method Adopt strong corrosion resistance, high speed heating electric heater,
multi-point layout, stability, good uniformity.
Spray system Wall mounted spray system, adjustable inlet nozzle, long time work without
crystallization, uniform distribution of fog particles.
Salt solution