Content :

Huaguang TD Gplus aluminum processless fujifilm thermal ctp plate



Operation





Unpack under day light or yellow light, it is suggested that the plate making room avoid natural light. For manual or semi-automatic plate-making equipments, when loading and unloading plates, we should avoid scratch, which may in uence plate properties.





Transportation and Storage





Packed in seal and stored by means of preventing from light/moisture, over heat and high humidity. Recommended conditions: 18C~24C, 40%~50% RH





Key-points





1. After imaging exposure, the longest time which plate can be placed for without affecting the printing quality is the latent image stabilization.





2. The paper number of start-up is the paper number at loss from the rst paper to providing completely clean background.





3. Printing methods: rstly clean the ink on the rubber blanket with washing water, run water roller 30 to 60 seconds, and then close the ink roller to run for 20-40 seconds and nally start paper printing.














TECHNICAL DATA





 





TD-Gplus PROCESSLESS CTP PLATE






Plate Type



Non-ablation thermal negative-type





Application




Suitable for sheet-fed offset press or high speed rotary offset pressRun length: 100,000 impressions
Suitable for different types of traditional inks and fountain solutions, including alcohol`s substitutes as fountain solutions Unsuitable to improve run length by baking plates






Substrate




Electrochemically grained and anodized aluminum substrate





.huabaoiguang.com